Filter
Top Products
30
Preparations for Song Production
When recording a new song, you’ll need to specify the time signature. However, after you’ve executed
Song Clear or turned the power on, the time signature will always be set to 4/4, so you’ll need to change
this only if your new song uses a time signature that’s different than this. In this example we’ll assume that
you’re recording a 4/4 song, so we won’t change this setting.
If you want to specify a time signature other than 4/4, refer to the Owner’s Manual section
“Specifying the Time Signature (Beat Track)”
(p. 219).
Here’s how to specify the tempo when recording the song.
1. Press [TEMPO].
The Tempo window appears.
2. Use the VALUE dial or use [INC] [DEC] to specify the tempo.
• If you turn the VALUE dial while holding down [SHIFT], you’ll be able to make fine adjustments below the
decimal point.
• If you press [F7 (Click)] to turn it on, a click will sound at the specified tempo. The click will turn on/off
each time you press the button.
• If you press [F6 (Tap Tempo)], you can specify the tempo by repeatedly pressing the button at the desired
tempo (Tap Tempo). Press the button three times or more at quarter-note intervals of the desired playback
tempo.
3. When you’ve finished making settings, press [F8 (Close)].
Specifying the time signature
Specifying the tempo
Fantom-G_q_e.book 30 ページ ２００８年２月４日 月曜日 午後２時２６分