Filter
Top Products
Setting up | Other practical functions
34
r
FR-7b/FR-5b V-Accordion
(1) While the Main page is displayed, press the [UP]
button four times.
(2) Press the [DATA÷ENTER] knob to select either “Valve
Level” or “Button Level”, depending on which
parameter you want to set.
(3) Turn the [DATA÷ENTER] knob (or use the [UP]/
[DOWN] buttons) to select the desired noise level
(Off, –40~“Std”~+40).
A negative (–) value decreases the level of the
selected noise parameter, a positive (+) value
increases it. Select “Std” to return to the factory
value, and “Off” if you do not need the noise in ques-
tion.
(4) Press [EXIT÷JUMP] to return to the Main page.
Volume-related functions
The remaining “shortcuts” allow you to quickly change
the balance of the orchestral sections. Use the [DOWN]
button to select them.
■Orchestra Volume, Orc. Bass Volume, Orc. Chord
Volume, Orc. FBass Volume
These parameters allow you to set the volume of the
Treble, Bass Orchestra, Orchestra Chord, and Orches-
tra Free Bass sections relative to the associated
accordion part. See pages 27, 29, 30, and 30 for
details.