Filter
Top Products
23
Song Functions
1.
Press MODE [SONG] so the button is lit.
2.
Turn the VALUE dial to select a song.
3.
Press [ENTER].
4.
Press [ ] to play the song.
To stop, press [ ] once again.
When you select a user song, the temporary song memory
(Sng00) will be overwritten by the user song you selected.
You can't play back SMF data that contains more than 16 parts.
You can use the following buttons to do this.
•[ ]
Moves to the beginning of the song.
•[ ]
Moves to the preceding measure.
•[ ]
Moves to the next measure.
Repeatedly Playing a Specified Region
You can make a specified region (A–B) play repeatedly.
1.
Use [ ][ ] to move to the measure at which you
want repeat playback to begin.
2.
Press [MARKER A-B] to set marker A to the current
location.
3.
Use [ ][ ] to move to the measure at which you
want repeat playback to end.
4.
Press [MARKER A-B] to set marker B to the current
location.
5.
Press [REPEAT A-B].
6.
Press [ ] to start repeat playback.
Don't set a marker in the last measure of a song; repeat playback
will not work properly if you do so.
You can mute (silence) a desired track of the song. For example, if
you’ve copied an SMF (Standard MIDI File) to the GW-7, you can
mute one of the tracks, and play that part yourself on the keyboard.
Muting a Track
1.
Press BAND TYPE [DRUMS & BASS] (factory default
setting: track 10), [COMBO] (factory default setting: track
1), or [FULL] (factory default setting: track 2) to specify the
track you want to mute.
2.
Press [ ]. The song will play, and the track you
specified in step 1 will be muted.
Changing the Muted Track
You can change the mute track specified for each button [DRUMS &
BASS], [COMBO], and [FULL].
1.
Press and hold one of the BAND TYPE buttons [DRUMS &
BASS], [COMBO], or [FULL]. The mute track setting screen
will appear.
2.
Turn the VALUE dial to change the track that will be muted.
Selecting and Playing a
Song
Moving the Playback Location of a
Song
Minus-One Playback
GW-7_e.book 23 ページ ２００５年２月１６日 水曜日 午前８時４８分