Filter
Top Products
26
Chapter 2. Performance
Changing the beat of metronome
4
Hold down the [Song/Tempo] button, and press the [-] or [+] button.
The currently selected beat will be displayed.
If you hold down the [Song/Tempo] button and press the [-] or [+] button, the beat
will change.
If you hold down the [Song/Tempo] button and press the [-] and [+] buttons
simultaneously, the beat will go back to what it was before you changed it.
fig.disp-beat
Stopping the metronome
5
Once again press the [Metronome/Count In] button, getting the button to
go dark.
The metronome will stop.
■
Changing the Metronome Volume
The volume of the metronome can be adjusted, with nine volume levels available.
1
Hold down the [Metronome/Count In] button and press the [-] or [+]
button.
The currently specified volume will be displayed.
Continue to hold down the [Metronome/Count In] button, and press the [-] or [+]
button to sound the metronome, and change the volume.
fig.disp-metrovol
Display
beat Display beat
2.2
2/2
6.4
6/4
0.4
Only weak beats
7.4
7/4
2.4
2/4
3.8
3/8
3.4
3/4
6.8
6/8
4.4
4/4
9.8
9/8
5.4
5/4
12.8
12/8
NOTE
It is not possible to change the
b
eat during song playback or
recording.
Correspondence between
beat and tempo display
Beat Tempo Value
2/2 =10–125
x/4 =20–250
x /8 =40–500
This is set to “4” when the
instrument is turned on.
When you hold down the
[Metronome/Count In] button,
the currently specified
metronome volume will be
displayed.
NOTE
When the metronome volume
is set to “0,” the metronome
sound does not play.
HP103_e.book 26 ページ ２００５年３月２４日 木曜日 午後４時５８分