Filter
Top Products
27
Chapter 2. Performance
Splitting the Keyboard Into Two
Sections for Four-Hand Performances
(Twin Piano Mode)
You can divide the keyboard into two separate sections, allowing two people to
perform in the same registers.
1
While holding down the [Split] button and press the [Piano] button.
The [Split] button’s indicator will light, and Twin Piano Mode is switched on.
fig.panel3-1
The following occur when Twin Piano Mode is switched on:
• The keyboard is divided into two separate sections, and the pitch
changes.
• The right pedal now functions as the damper pedal for the right
keyboard section, and the left pedal functions as the damper pedal for
the left keyboard section.
• The center pedal now functions as the Sostenuto pedal for the right
keyboard section.
• If recording is in progress or the instrument is in recording standby,
recording is stopped or recording standby is cancelled. The [Rec] button
is disabled while Twin Piano Mode is active.
• If the Split function happens to be on, it is switched off.
• The same tone and effects are used on both the left and right sides. If the
piano is in Split Play before switching Twin Piano Mode on, then the
tone selected for the right hand in Split Play is used.
* The damper resonance function is not operational in Twin Piano Mode.
2
To exit the function, press the [Split] button.
C4 C5 C6 C7 C8C3C2C1
C4 C5 C6C3C4 C5C3 C6
1
HP103_e.book 27 ページ ２００５年３月２４日 木曜日 午後４時５８分