Filter
Top Products
37
Chapter 5. Changing Various Settings
■
Setting the Tuning Curve
(Stretch Tuning)
A piano is generally tuned to a pitch with a lower bass range
and a higher treble range than equal temperament. This
special tuning method for pianos is called “Stretch Tuning.”
If you press
the [Harpsi] button
in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
fig.disp-On
Power-up default setting
On
→
This effect works only with the piano tones.
■
Applying the Damper Pedal to
the Left-hand Keyboard Area
When you are using Split play (p. 24), you can apply the
damper pedal effect to the sound played by the left-hand
keyboard range.
If you press
the [Organ] button
in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
fig.disp-Off
Power-up default setting
OFF
■
Changing How Grand Space is
Applied (Grand Space Mode)
If you press
the [Grand Space] button
in step 2 of “Making
Detailed Settings (Function)” (p. 35), a display like the
following will appear.
Display
Descriptions
OFF
This is the standard tuning curve. This is the
right choice when using Dual play (p. 23), or
when playing in ensemble with other instru-
ments.
On
This tuning curve expands the bass and tre-
ble ends somewhat. It is suitable for perfor-
mances such as piano solos. This setting is in
effect when you turn on the power.
Display
Descriptions
On
The damper pedal effect will be applied to
the sound of the left and right hand key-
board area.
OFF
The damper pedal effect will not be applied
to the sound of the left-hand keyboard area.
Display Descriptions
1
When the headphones are connected, the
depth effect is optimized for headphones, and
when no headphones are connected, the
optimal depth for speakers is applied.
2
The optimal depth for speakers is used,
regardless of whether or not headphones are
connected.
Grand Space is also applied to the sound
output from the Output jacks, making this
convenient when you want to play through
speakers connected to the Output jacks.
3
The optimal depth for headphones is used,
regardless of whether or not headphones are
connected.
HP103_e.book 37 ページ ２００５年３月２４日 木曜日 午後４時５８分