Filter
Top Products
38
Chapter 5. Changing Various Settings
Preventing the Settings from
Changing During Performance
■
Disabling Everything Except
Piano Play (Panel Lock)
The “Panel Lock” function locks the HP103 in a state where
only piano performance can be used, and all buttons will be
disabled. This prevents the settings from being inadvertently
modified even if children press the buttons accidentally.
In the Panel Lock state, only the grand piano sound can be
played.
1.
Turn the volume to the minimum, and press the [Power
On] switch to turn off the power.
2.
Hold down the [Piano] button and press the [Power
On] switch to turn on the power.
The following display will appear.
fig.disp—-
All buttons are disabled.
Adjust the volume.
When you play the keyboard, the grand piano sound
will be heard.
To defeat the Panel Lock function, turn the volume down
to the minimum, and turn on the power once again.
■
Disabling the Buttons When
Using a Tone Other Than Piano
(Tone Lock)
Even when using Tones other than the Piano, you can set the
instrument so all of its buttons are disabled (the settings in
effect at that time will be maintained). That way, you won't
get switched to the wrong settings if you inadvertently press
a few buttons while you’re playing.
1.
Hold down the [Demo] button and press the [Key
Touch] button.
The song or the metronome sound that is playing will
stop. The following will appear in the display:
fig.disp—-
All buttons are disabled while the instrument is set like this.
To cancel the Tone Lock function, once again hold down
the [Demo] button while you press the [Key Touch]
button. Alternatively, you can lower the instrument’s
volume all the way and switch its power off. Then, turn
it on again.
Using the V-LINK function
Connecting the HP103 to a V-LINK compatible image device
allows you to control the images with the HP103.
V-LINK
V-LINK ( ) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
How to Use the V-LINK
1.
Hold down the [Split] button, and press the [Reverb]
button.
The HP103 switches to the set mode.
2.
Press the [Right] button.
The button’s indicator flashes.
The following appears in the display.
fig.
Power-up default setting
OFF
3.
Press the [-] and [+] buttons to switch the V-LINK
function on and off.
You can control images using the twelve keys at the left
end of the keyboard.
While V-LINK is switched on, the following will appear
in the display.
* While V-LINK is switched on, no sound is produced when you
press any of the twelve keys at the left end of the keyboard.
How to exit function mode
4.
Press the [Split] or [Reverb] button.
The button’s indicator returns to its original state.
Display
Descriptions
OFF
The V-LINK function is switched off.
On
The V-LINK function is switched on. You
can control images using the twelve keys at
the left end of the keyboard.
HP103_e.book 38 ページ ２００５年３月２４日 木曜日 午後４時５８分