Filter
Top Products
31
Chapter 2. Performance
■
Changing the keyboard’s split point
You can change the location where the keyboard is divided (the split point) within
the range of B1 through B6.
1
While continuing to hold the [Split] button, press the key that you want
to specify as the split point.
The key you pressed becomes the split point, and belongs to the left-hand section of
the keyboard.
You can also change the setting by pressing the [-] or [+] button while continuing to
hold down the [Split] button.
If you hold down the [Split] button and simultaneously press the [-] and [+] buttons,
the setting will return to its original value (F#3).
fig.disp-splitpoint
Changing How the Center Pedals Work
With the factory setting, the center pedal functions as a sostenuto pedal (p. 14).
However, the center pedal setting can be changed to any of a variety of different
functions.
1
Press the [Center Pedal] button to get the appropriate indicator to light.
Lighted
Indicator
Description
Sostenuto
Sets function to sostenuto pedal (p. 14).
Layer
When you play a key while pressing on the center pedal, a suitable
tone to match the piano tone is selected, and the two tones are
layered and played together.
The volume of the layer tone is adjusted according to how much
you press the pedal.
Octave
When you play a key while pressing on the center pedal, the note
for the key being pressed and the note one octave above it are
layered and played together.
You can adjust the volume of the sound one octave above the layer
tone by changing the pressure used on the pedal.
This is set at the factory to
“F#3.”
When you continue holding
the [Split] button, the currently
specified split point value will
b
e displayed.
The split point key is
displayed as follows.
Display
Letter
name
Display
Letter
name
Display
Letter
name
C C d E_
C C D E
E F F G
E F F G
A_ A b_ b
A A B B
1
If Acoustic Layering (p. 26)
and Dual function are
switched off, the Acoustic
Layering function is then
switched on.
HP107_e.book 31 ページ ２００５年７月２５日 月曜日 午後４時５０分