Filter
Top Products
Rear panel
VIMA JM-5
r
13
can connect a cable with a stereo 1/8” plug at one
end (this ones needs to be connected to the JM-5)
and two 1/4” or RCA mono plugs, or a 1/8” stereo
plug that connect(s) to the external audio source.
NOTE
The audio in level can be set using the “Audio In Level”
function (page 57).
F
AUDIO OUTPUT R & L/MONO sockets
These sockets transmit all audio signals the JM-5
generates as well as the signals you input to the
JM-5.
NOTE
If you can/want to use only one channel on your external
amplifier, connect the L/MONO socket to its input. For opti-
mum sound quality, we recommend working in stereo,
though.
G
VIDEO OUTPUT socket
Connect this socket to the appropriate input of your
TV or external display.
NOTE
The signal format (PAL or NTSC) is selectable (page 56).
H
MIDI IN/OUT socket
This socket allows you to either transmit (OUT) or
receive (IN) MIDI messages to/from an external MIDI
device (page 62). It can also transmit V-LINK mes-
sages (page 72).
NOTE
See “MIDI Direction” on p. 58 for how to select the function
of this socket.
I
COMPUTER port
Use a USB cable to connect the JM-5 to your com-
puter via this port (page 69). This port only transmits
and receives MIDI messages.
JM-5_US.book Page 13 Tuesday, December 14, 2010 10:29 AM