Filter
Top Products
Turning the power on/off
VIMA JM-5
r
17
Turning the power on/off
Once the connections have been completed, turn on the
power to your various devices in the order specified. By
turning on devices in the wrong order, you risk causing
malfunction and/or damage to speakers and other
devices.
NOTE
Never remove the USB memory while playback or recording is
running or while data are being read from, or written to, an
external USB memory.
Turning the power on
1.
Switch off the external amplification sys-
tem.
2.
Turn the [MASTER VOL] knob all the way to
the left to minimize the volume.
3.
Press and hold the [POWER] switch until the
“Starting Up…” message appears in the dis-
play.
The power will turn on, an opening message will
appear in the JM-5’s screen, and then the main page
will appear.
After a brief interval, the JM-5 will be ready to pro-
duce sound.
NOTE
This unit is equipped with a protection circuit. A brief inter-
val (a few seconds) after power up is required before the
unit will operate normally.
4.
Switch on your amplification system or con-
nect a pair of headphones (see p. 16).
5.
Use the [MASTER VOL] knob to adjust the
volume.
Turning the power off
1.
Turn the [MASTER VOL] knob all the way to
the left to minimize the volume.
NOTE
Never switch off the JM-5 while playback or recording is
running or while data are being read from, or written to, an
external USB memory.
2.
Switch off your external amplification sys-
tem.
3.
Press the JM-5’s [POWER] switch.
The display will go dark and the power will turn off.
NOTE
If you need to turn off the power completely, first turn off
the [POWER] switch, then unplug the power cord from the
power outlet. Refer to “Connecting the AC adaptor” on
p. 14.
JM-5_US.book Page 17 Tuesday, December 14, 2010 10:29 AM