Filter
Top Products
Menu parameters
56
r
VIMA JM-5
1.
Load a song with lyrics data (see p. 20).
2.
Select the “Internal Lyrics” command (see
“General procedure”).
3.
Press the [CURSOR÷VALUE] dial.
The internal display now shows the lyrics of the
selected song (4 lines at a time).
4.
At the end of the song, press and hold the
[EXIT] button to return to the main page.
External Lyrics
This is, in fact, a switch that allows you to cancel (“Off”)
or activate (“On”) the display of song lyrics on an exter-
nal screen.
User Settings
The settings of the “User Settings” parameters can be
saved to the JM-5’s global memory. If you don’t save
them, your changes are lost when you switch off the
JM-5.
1.
Select the “User Settings” function group
(see “General procedure” on p. 55).
2.
Rotate the [CURSOR÷VALUE] dial to select
the desired parameter, then press the dial.
NOTE
Some entries are function subgroups that first need to be
selected before you can edit their parameters.
3.
Use the [CURSOR÷VALUE] dial to make the
required changes.
The “User Settings” function group contains the fol-
lowing parameters and subgroups:
Display Brightness
Allows you to change the brightness of the JM-5’s
display.
Vocal Effect
See “Changing your voice/adding harmonies” on
p. 25.
Ambience Type
See “Adding ambience to your vocal performance” on
p. 23.
Space Echo
See “Adding echo to your vocal performance” on
p. 23.
Mic Settings
See “Setting the microphone equalizers and phantom
power” on p. 27.
Melody Mute
See “Using ‘Melody Mute’ and ‘Center Cancel’” on
p. 28.
Tuning
This parameter allows you to tune your JM-5 to
acoustic instruments that cannot be tuned. The
default setting is 440.0Hz.
Video Settings
To edit the video parameters, you need to press the
[CURSOR÷VALUE] dial to open the “Video Settings”
page.
The following table shows the “Video Settings”
parameters.
Lyrics Settings
To edit the Lyrics parameters, you need to press the
[CURSOR÷VALUE] dial to open the “Lyrics Settings”
page.
The following table shows the “Video Settings”
parameters.
Parameter Parameter
Display Brightness 0~25
Parameter Parameter
Tuning 415.3~466.2 Hz
Parameter Value Explanation
Mode PAL, NTSC Allows you to adapt
the JM-5’s video stan-
dard to the screen you
are using.
Aspect Ratio Full, Center Specifies the appropri-
ate aspect ratio in
according with your TV
Parameter Value Explanation
Background
Mode
Colour, Logo,
User
Colour: The back-
ground is empty but
uses the selected color.
Logo: The JM-5’s logo
is showed as back-
ground
User: The JM-5 will
use the selected .jpg
picture as background.
See page 33.
Background
Colour
1~8 Allows you to choose
the background color
Highlight
Colour
1~8 Selects the highlight
color
Row Displaying 2, 4 Allows you to select
the number text lines
the Lyrics function
may use on the exter-
nal screen. This param-
eter has no effect on
the internal display.
JM-5_US.book Page 56 Tuesday, December 14, 2010 10:29 AM