Filter
Top Products
Menu parameters
VIMA JM-5
r
55
12. Menu parameters
The [MENU] button provides access to a great number of parameters that allow you to fine-tune the JM-5’s behavior, to
edit song files, etc. This chapter discusses all “Menu” parameters that haven’t been dealt with so far.
General procedure
1.
Return to the main page by pressing and
holding the [EXIT] button.
2.
Press the [MENU] button.
The display changes to:
3.
Rotate the [CURSOR÷VALUE] dial to select
the desired function group.
The following function groups are discussed in this
chapter:
4.
Press the [CURSOR÷VALUE] dial to go to the
display page where you can edit the param-
eters of the selected group, or to execute
the selected command.
‘Menu’ parameters
Internal Lyrics
The JM-5’s display can show the lyrics of Standard MIDI
Files or mp3 songs you load. If such song files contain
Lyrics data, the lyrics are always displayed on an exter-
nal screen you connect to the JM-5 (see “Connecting a
television set” on p. 15), unless you set the “External Lyr-
ics” to “Off” (see above).
Sometimes, however, it may be wiser to orient the exter-
nal screen in such a way that the audience can easily
follow the lyrics, which may then mean that you no
longer see what is displayed. If you need to see the lyr-
ics, you can follow them on the JM-5’s internal display:
Function group Explanation
Internal Lyrics Allows you to activate the display of
lyrics data on the JM-5 itself. (Only for
SMF and mp3 files for which there are
lyrics data.)
External Lyrics Allows you to cancel (“Off”) or activate
(“On”) the display of song lyrics on an
external screen.
MENU
User Settings This function group contains parame-
ters that apply to all sections of the
JM-5 (see p. 56).
SMF Cover This function group allows you to
quickly change the orchestration of a
Standard MIDI File (see p. 43).
SMF Makeup
Tools
This function group allows you to edit
Standard MIDI Files (see p. 47).
SMF
Compressor
This function group allows you to edit
the JM-5’s SMF compressor (see p. 44).
SMF Equalizer This function group allows you to edit
the JM-5’s SMF equalizer (see p. 46).
MIDI This function group allows you to edit
the JM-5’s MIDI parameters (see p. 62).
External Tone
Parts
This function group allows you to set
up the three “External Tone Parts” that
can be controlled from an external
MIDI device (see p. 59).
V-LINK Allows you to take advantage of the
JM-5’s V-LINK functions (see p. 72).
Factory Reset This command allows you to load the
JM-5’s factory settings (see p. 70).
Format USB
Device
This command allows you to format an
optional USB storage device (see p. 70).
Function group Explanation
JM-5_US.book Page 55 Tuesday, December 14, 2010 10:29 AM