Filter
Top Products
Panel description
VIMA JM-5
r
11
3. Panel description
Front Panel
A
USB memory port
Connect the supplied M-UF2G an optional USB mem-
ory here.
Note: Roland does not recommend using USB hubs, irre-
spective of whether they are active or passive. Please con-
nect only one USB storage device to this port.
NOTE
Use USB storage devices sold by Roland. We cannot guar-
antee operation if any other USB memory is used.
B
BACKING knob
This knob allows you to set the volume of the songs
(audio or MIDI) you play back.
C
MASTER VOL knob
Use this knob to set the JM-5’s global output volume
(all signals transmitted to the OUTPUT sockets). The
setting of this knob also determines the volume in
the headphones you may connect.
D
Headphone socket
This is where you can connect a pair of optional
headphones (Roland RH-series).
E
Display
This display shows information related to your opera-
tion and the lyrics of the songs you play back (if they
contain lyrics data).
F
USB MEMORY button
Press this button to call up a list of the files stored on
the USB memory connected to the JM-5‘s USB mem-
ory port.
G
MENU button
This button allows you to open the JM-5’s menu page
where you can view and select all available functions.
Press it together with the [EXIT] button to listen to
the JM-5’s demo songs.
H
EXIT button
This button is used to return to a higher menu level.
Press and hold it to return to the JM-5’s main display
page.
I
MIC1 and MIC2 knobs
The [MIC1] and [MIC2] knobs control the level of the
microphone connected to the MIC 1 or MIC 2 jack.
J
SPACE ECHO knob
Press this button to switch the echo effect for the
microphone signals on or off. Press and hold it if you
need to change the echo effect’s settings. Pressing
this button together with the [VOCAL EFFECT] button
will activate TALK mode (page 25).
B
C
I
E
FGH
J
D
L
M
NO
P
Q
R
S
T
UVW
A
K
JM-5_US.book Page 11 Tuesday, December 14, 2010 10:29 AM