Filter
Top Products
Playback functions for SMF songs
44
r
VIMA JM-5
The display changes to:
4.
Rotate the [CURSOR÷VALUE] dial to select
the character position you want to change,
then press the dial.
5.
Rotate the [CURSOR÷VALUE] dial to select
the desired character.
6.
Press the [CURSOR÷VALUE] dial to confirm
your selection (the cursor changes to an
underscore).
7.
Repeat steps (4)~(6) to complete the name.
8.
If you made a mistake, correct it using one
of the procedures described in the table on
page 34.
9.
Press the [MENU] button to confirm your
desire to save the song.
The display returns to the “SMF Cover” list.
If the USB storage device already contains a song file
of that name, you will be asked whether you want to
overwrite it:
In this case, select “YES” using the [CURSOR÷VALUE]
dial to replace the old file with the new one (the old
file will be lost).
Otherwise, select “NO” to return to the “Save” page
and enter a different name.
Using the SMF compressor and SMF
equalizer
The JM-5 contains two effect processors that allow you
to change the sound of SMF songs (WAV and mp3 files
cannot be processed in this way).
Although they are not meant to be changed for every
song you intend to play back, switching settings is rela-
tively easy and could therefore be used to great effect.
NOTE
These parameters also affect the External Tone Parts (page 59).
SMF Compressor
The multi-band compressor/limiter allows you to pro-
cess three frequency ranges separately. A compressor
reduces high levels (peaks) and boosts low levels,
smoothing out fluctuations in volume.
1.
Select an SMF song (see p. 20).
2.
Press the [MENU] button.
The display changes to:
3.
Rotate the [CURSOR÷VALUE] dial to select
“SMF Compressor“.
4.
Press the dial.
The display changes to:
NOTE
The settings you make on this page can be saved to a User
memory and recalled as and when necessary.
5.
Press [®÷π] to start playback of the selected
song.
6.
Rotate the [CURSOR÷VALUE] dial to select
the “Switch” parameter, then press the dial.
MENU
JM-5_US.book Page 44 Tuesday, December 14, 2010 10:29 AM