Filter
Top Products
Playback functions for SMF songs
52
r
VIMA JM-5
Edit EQ
To edit the equalizer parameters, press the
[CURSOR÷VALUE] dial to jump to the “Edit EQ” page.
You can then use the [CURSOR÷VALUE] dial to edit
the available parameters:
Undo Changes
This function allows you to cancel all changes you
have made and to revert to the previously saved ver-
sion.
Select this parameter, then press the
[CURSOR÷VALUE] dial to revert to the original version.
Drum Instrument (D)
If you want to edit the settings for specific instru-
ments of the selected Drum Set, press the
[CURSOR÷VALUE] dial to jump to the “Drum Instru-
ment” page.
Select and instrument and press the [CURSOR÷VALUE]
dial.
You can then use the [CURSOR÷VALUE] dial to edit
the available parameters.
Parameter Setting Explanation
Equalizer Off, On This parameter has the
same function (and is
linked to) the “Equal-
izer” parameter
described above.
High Frequency 1500 Hz, 2000
Hz, 3000 Hz,
4000 Hz, 6000
Hz, 8000 Hz,
12000 Hz
Allows you to set the
cutoff frequency of
the high band (this is a
shelving filter).
High Gain –15~+15 dB Use this parameter to
set the level of the
selected “High” fre-
quency. Positive val-
ues boost (increase the
volume of) that fre-
quency, negative val-
ues cut (attenuate) it.
Mid Frequency 200~8000 Hz Allows you to set the
cutoff frequency of
the middle band (this is
a peaking filter).
Mid Q 0.5, 1.0, 2.0,
4.0, 8.0
Use this parameter to
specify the width of
the “Mid Frequency”
band that you want to
boost or cut. Smaller
values mean that
neighboring frequen-
cies above/below that
value are also affected.
Mid Gain –15~1+5 dB Use this parameter to
set the level of the
selected “Mid Fre-
quency”. Positive val-
ues boost (increase the
volume of) that fre-
quency, negative val-
ues cut (attenuate) it.
Low Frequency 90 Hz, 150 Hz,
180 Hz, 300
Hz, 360 Hz,
600 Hz
Allows you to set the
cutoff frequency of
the low band (this is a
shelving filter).
Low Gain –15~+15 dB Use this parameter to
set the level of the
selected “Low” fre-
quency. Positive val-
ues boost (increase the
volume of) that fre-
quency, negative val-
ues cut (attenuate) it.
Undo Changes (Press the
[CURSOR÷VAL
UE] dial)
This function allows
you to cancel all set-
tings you have made
and to revert to the
previously saved ver-
sion.
Parameter Setting Explanation
Instr. All Drum Set
Instruments
Select the drum instru-
ment you want to edit.
Parameters for the selected instrument
Mute Off, On Suppress (or add) the
selected instrument.
Solo Off, On Switches off all instru-
ments except the
selected instrument.
Volume -127~+127 Use this parameter to
set the volume of the
selected drum instru-
ment.
Reverb -127~+127 Use this parameter to
set the reverb send
level of the selected
drum instrument. The
effect itself can be
changed on the “Com-
mon” page.
Chorus -127~+127 Use this parameter to
set the chorus send
level of the selected
drum instrument. The
effect itself can be
changed on the “Com-
mon” page.
Parameter Setting Explanation
JM-5_US.book Page 52 Tuesday, December 14, 2010 10:29 AM