Filter
Top Products
External Tone Parts (for MIDI module operation)
60
r
VIMA JM-5
8.
Press and hold the [EXIT] button (its indica-
tor stops flashing) to return to the JM-5’s
main page.
Operation details
Family and Tone selection
1.
Press the [MENU] button and rotate the
[CURSOR÷VALUE] dial to select “External
Tone Parts”.
2.
Press the dial to confirm your selection.
3.
Rotate the [CURSOR÷VALUE] dial to select
“Part”, then press the dial.
4.
Rotate the [CURSOR÷VALUE] dial to select
the part (“Tone1”~“Tone3”) you want to
edit, then press the dial.
5.
Rotate the [CURSOR÷VALUE] dial to select
“Families”, then press the dial.
The display changes to:
This is only an example: the JM-5 may just as well
display another Tone family.
6.
Rotate the dial to select the desired Tone
family.
7.
Press the [CURSOR÷VALUE] dial (see the
“Push: Go to tone” message).
The display now shows a list of all Tones that belong
to the selected family.
8.
Rotate the [CURSOR÷VALUE] dial to select
the desired sound.
9.
Do one of the following:
(a) If you cannot find the Tone you are looking for,
press the [CURSOR÷VALUE] dial (“Push: Go to fami-
lies”).
(b) If you are happy with the sound, press the [EXIT]
button to return to the “External Tone Parts” page.
NOTE
You can also select the “Families” parameter to check
which family the currently selected Tone belongs to.
Setting the remaining ‘External Tone Parts’
parameters
1.
Press the [MENU] button and rotate the
[CURSOR÷VALUE] dial to select “External
Tone Parts”.
2.
Press the dial to confirm your selection.
3.
Rotate the [CURSOR÷VALUE] dial to select
“Part”, then press the dial.
4.
Rotate the [CURSOR÷VALUE] dial to select
the part (“Tone1”~“Tone3”) you want to
edit, then press the dial.
5.
Rotate the [CURSOR÷VALUE] dial to select
the desired parameter, then press the dial.
The display changes to:
6.
Rotate the dial to select the desired setting,
then press the dial.
7.
Repeat steps (5) and (6) to set the remain-
ing parameters.
8.
Press and hold the [EXIT] button (its indica-
tor stops flashing) to return to the JM-5’s
main page.
Panpot L63~0~R63 Use this parameter to
set the stereo place-
ment of the selected
part. “0” means “no
change”, “L” values
shift the instrument
towards the left and
“R” values shift it
towards the right.
Preset User1~10 Allows you to select
the “User” memory
whose setting you
want to use or edit.
Parameter Setting Explanation
EXIT
JM-5_US.book Page 60 Tuesday, December 14, 2010 10:29 AM