Filter
Top Products
Functions related to song playback
38
r
VIMA JM-5
11.
If you made a mistake, correct it using one
of the following procedures:
12.
Press the [MENU] button to confirm the new
name.
The display returns to the list of available playlists.
If the USB storage device already contains a file of
that name, you will be asked whether you want to
overwrite it:
In this case, select “YES” using the [CURSOR÷VALUE]
dial to replace the old file with the new one (the old
file will be lost).
Otherwise, select “NO” to return to the “Rename”
page and enter a different name.
Deleting a playlist
Playlists that you no longer need can be deleted. Note
that this will not reclaim a big amount of storage capac-
ity, because the JM-5’s playlists only contain references
to the song files—not the songs themselves.
1.
See steps (1)~(4) under “Renaming a playl-
ist” on p. 37 for how to select the playlist
file you want to delete.
2.
Rotate the [CURSOR÷VALUE] dial to select
“Delete”.
3.
Press the [CURSOR÷VALUE] dial to confirm
your selection.
The display changes to:
4.
Select “YES” by first rotating the
[CURSOR÷VALUE] dial and then pressing it to
delete the playlist file.
The JM-5 returns to the list of available playlists.
If you do not want to delete your playlist after all,
select “NO”.
Specifying the playlist behavior
The JM-5 provides a function that lets you specify
whether all songs of the selected playlist should be
played back one after another or whether playback
should stop at the end of each song. This function is on
by default, but performers who rely on the “Playlist”
functionality for their set may want to switch it off.
1.
Press the [MENU] button.
Correction Procedure
Change an existing
character
(a) Press the [CURSOR÷VALUE]
dial once or twice until the
cursor looks like an under-
score.
(b) Rotate the dial to select the
erroneous character, then
press the dial.
(c) Rotate the dial to select the
correct character, then press
the dial.
Delete a character Perform steps (a) and (b) above,
then press the [º] button.
Insert a character
(a) Perform steps (a) and (b)
above, then press the [‰] but-
ton. The new character posi-
tion is inserted before the
position you selected.
(b) Press the dial to select the
current position for editing,
then rotate the dial to change
the newly added character.
Press the dial to confirm your
setting.
MENU
JM-5_US.book Page 38 Tuesday, December 14, 2010 10:29 AM