Filter
Top Products
Operation details
VIMA JM-5
r
61
Saving your settings to a ‘User’ memory
After setting everything to your liking, you can decide to
save your settings to one of the 10 External Tone Parts
“User” memories.
NOTE
If you switch off the JM-5 or if you select another “User”
memory before saving your last changes, those settings are
lost.
1.
If necessary, press the [MENU] button and
use the [CURSOR÷VALUE] dial to select
“External Tone Parts”.
The display changes to:
2.
Press the [MENU] button again (“[MENU]:
Write User”).
The display changes to:
3.
Rotate the [CURSOR÷VALUE] dial to select
the “User” memory (1~10) where you wish
to save your settings.
4.
Press the [MENU] button to confirm your
choice and to save the settings to the
selected “User” memory.
The display briefly confirms the operation and returns
to the “External Tone Parts” page.
Loading the settings of an existing ‘User’ memory
1.
If necessary, press the [MENU] button and
use the [CURSOR÷VALUE] dial to select
“External Tone Parts”.
The display changes to:
2.
Rotate the [CURSOR÷VALUE] dial to select
“Preset”, then press the dial.
3.
Rotate the [CURSOR÷VALUE] dial to select
the “User” memory you wish to use.
4.
Press the dial to load the settings of the
selected “User” memory.
5.
Press and hold the [EXIT] button (its indica-
tor stops flashing) to return to the JM-5’s
main page.
JM-5_US.book Page 61 Tuesday, December 14, 2010 10:29 AM