Filter
Top Products
148
Chapter 9 Various Settings
Chapter 9
■
Changing the Screen Message
When the Power Is Turned On
(Opening Message)
You can modify this screen to show your favorite phrase
when the power is turned on.
At Step 3 in “Procedure” (p. 142), touch <Opening Message>.
A screen like the one shown below appears.
fig.d-openmsg.eps_50
Use to move the cursor.
When you touch the character icon, the character is input
where at the position.
When you touch the icon for the character to be input, the
character appears at the cursor position. For example,
touching the <ABC> icon in succession cycles you through the
available choices in that character group (A
→
B
→
C
→
A...).
Each touch of <A-a-0-!> cycles the type of characters through
“English (upper case),” “English (lower case),” “numerals,”
“symbols,” then back to “English (upper case).”
When you touch <Del>, the character at the cursor position is
deleted.
When you touch <Ins>, a space is inserted at the cursor
position.
When you have finished inputting the characters, touch
<Execute>.
NOTE
Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR’s internal
memory, making it unusable.
If you touch <All Clear> at the bottom of the screen and
then touch <Execute>, the display reverts to the screen
that normally appears when you turn on the power to
the instrument.
■
Remembering the Settings
Even When the Power is
Turned Off (Memory Backup)
Normally, the various settings revert to their default values
when the power is turned off. However, you can specify that
the settings will be remembered even when the power is
turned off. This function is called “Memory Backup.”
For more on the settings stored using Memory Backup,
refer to “Parameters Stored in Memory Backup” (p. 184).
At step 3 in “Procedure” (p. 142), touch <Memory Backup>.
A screen like the one shown below appears.
fig.d-memory.eps_50
Touch <Execute>.
The confirmation message appears on screen.
Touch <OK> to store the setting.
When the setting has been stored in memory, the previous
screen will reappear.
NOTE
Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR’s internal
memory, making it unusable.
KR107_e.book 148ページ ２００５年８月３日 水曜日 午前９時３６分