Filter
Top Products
166
Chapter 10 Connecting External Devices
Chapter 10
Connection examples
fig.comp.e
1.
Turn off the power to the KR107 and the computer.
2.
Start up the computer.
3.
Connect the KR107 and the computer with a USB cable.
4.
Turn on the power to the KR107.
→
Refer to the owner’s manual that came with your computer
■
Making the Settings for the
USB Driver
This sets the USB driver used when you have a computer
connected to the USB connector.
1.
Open the Basic screen or press the One Touch [Piano]
button.
2.
Touch the [Option] button.
3.
Touch <USB Driver>.
4.
Touch
to select the driver type.
5.
After changing the settings, turn the power off, then on
again.
Indication
Description
Original
Select this when using the supplied
driver with a USB connection.
Under ordinary circumstances, use this
mode.
Original 2
This is an auxiliary mode.
It is not normally used.
Generic
Select this when using a generic USB
driver included with the OS with a USB
connection.
Computer
USB connector
USB Connector
of your Computer
Bottom left of the KR
KR107_e.book 166ページ ２００５年８月３日 水曜日 午前９時３６分