Roland KR107 Musical Instrument User Manual


 
170
Troubleshooting
Appendices
Movement of
notation or
keyboard display
not smooth
There may be times when a complex variety
of information is being displayed or when a
large amount of data is displayed at one
time. Change the notation display settings as
described below (p. 76).
- Set “Bouncing Ball” to “Off”
- Set “Color Notation” to “Off”
- Set “Keyboard” to “Off”
- Set “External Display (p. 158)” to “Panel”
Song becomes
unstable
In certain cases, such as when playing
songs on external memories, the song may
lag when excessive amounts of
performance data are used.
Unable to play
back internal
songs
Have you pressed the remote control’s
[MUTE] button, muting the sound?
Unable to play
back audio files
The KR107 can play back audio files in the
following format.
• “.WAV” extension
16bit linear
Sampling rate of “44.1 kHz”
Stereo
Can’t record
Can’t record
Has one of the track buttons for recording
been selected? (p. 96)
Has the setting for “Punch-in Recording”
(p. 119) or “Tempo Recording” (p. 128)
been made?
Select the replace recording method (p.
118).
It is not possible to record while the
notation is being generated. Once the unit
has finished generating the notation (i.e.,
when the measure number in the screen is
no longer highlighted), try the operation
once again.
You cannot overdub with audio files.
Tempo of recorded
song or
metronome is off
If you select an internal song in which the
tempo changes during the song, and then
record, the tempo will change in the same
way for the performances that are recorded
on the other tracks. The tempo of the
metronome will also change in the same
way.
If you record additional material without
erasing the previously recorded song, the
song will be recorded at the first-recorded
tempo. Please erase the previously
recorded song before you re-record (p. 97).
Case
Cause/Remedy
The recorded
performance has
disappeared
Any performance that has been recorded is
deleted when the power to the KR is turned
off or a song is selected. A performance
cannot be restored once it’s been deleted.
Be sure to save it on an external memory or
User Memory before you turn off the
power
(p. 102).
Case
Cause/Remedy
KR107_e.book 170ページ 2005年8月3日 水曜日 午前9時36分