Filter
Top Products
11
Once connections have been made (p. 10), turn on the power to all
connected devices in the order as specified below. Doing otherwise
raises the risk of damage or malfunction to the connected devices.
fig.powerOn
1.
Make sure that the HD-1s [VOLUME] knob, and that of
any connected amp, is set to the minimum level.
2.
Turn on the HD-1.
3.
Turn on the power of the connected amp/speaker.
4.
Then raise the volume of both to get the sound level
required.
* As there is a built-in protection circuit, it takes a few seconds
before the HD-1 is ready to play.
Turning On the Power