Filter
Top Products
12
Before playing the snare pad, you must tighten the
head. If it is too loose, problems such as faulty
triggering may occur.
1.
Use the included drum key, and tighten each tuning bolt
slightly, in the order shown in the diagram. This
guarantees even tension and a correct head response.
fig.Adjust-e
2.
While hitting the pad, make final adjustments to have
the best feel and response from the head.
• Adjusting the tension of the snare head will not change the
sound as it would on an acoustic drum.
• Head tuning should be checked on a regular basis, as constant
playing may slacken the tension.
• Synthetic rubber is used on the pads and cymbals. Should the
smell of rubber bother you, make sure there is good air
circulation in the room. NEVER place the HD-1 near a heater or
source of high temperature.
Adjusting the Head Tension on the Snare
1
3
4
25
6
Loosen Tighten
The drum key can be
conveniently mounted on the
hook of the arm pipe.
HD-1_r_e.book 12 ページ ２００７年３月２８日 水曜日 午後６時５８分