Filter
Top Products
Owner's Manual
11
XML POWERED MIXERS
Controls and Functions
26. EFX TO MON - The EFX TO MON control is used to adjust the level of the sound being sent back from the built-in digi-
tal eect to the MONITOR bus. This allows you to hear the DSP eects in your monitor speakers.
27. Graphic Equalizer (XML610 and XML910 Only) - The 7-band Graphic Equalizer allows you to contour the frequency
response of the MONITOR bus signal, providing a maximum of 12dB of cut/boost for each frequency band. This is an
especially useful tool for cutting frequencies that cause annoying feedback. The frequency response is at when the
sliders are in the center position. Moving a slider in the positive direction will boost that frequency by as much as
12dB, and moving the slider in the negative direction will cut that frequency by up to 12dB. Once you set a frequency
response curve using the Graphic Equalizer, the EQ curve is applied to both the MONITOR bus signal that is sent to
the monitor speakers, and the line level signal which is sent from the MONITOR output jack.
28. MASTER - The MASTER level control is the overall control for the MONITOR bus. The MONITOR level aects both the
MONITOR bus signal which is sent to the monitor speakers and the line level signal which is sent from the MONITOR
output jack.
26
27 28