Filter
Top Products
15
Using the radio microphone
Deactivating the autolock function temporarily
To be able to make changes to the settings via the operating menu, you
must temporarily deactivate the lock mode.
After you have exited the operating menu, the lock mode is automatically
re-activated after 10 seconds. You can also immediately activate the lock
mode by pressing the ON/OFF button º briefly.
Identifying the radio microphone
The radio microphone comes with nine interchangeable color-coded
identification markers, allowing you to clearly identify each radio
microphone.
̈ To achieve this, either press the ON/OFF
button º or the multi-function switch ¶
(switch position ț SET).
“LOCK” appears on the display panel.
̈ Slide the multi-function switch ¶ to the
position ̆ (UP) or ̄ (DOWN).
“UNLOCK” appears on the display panel.
̈ Press the multi-function switch ¶ (
switch
position
ț SET).
You can now change the settings.
̈ To remove the identification marker, press
the two snap-in pins together while
sliding the identification marker out of the
guide rails.
̈ Put on the new identification marker by
sliding it onto the guide rails.
¶
º
SET
DOWN
UP
¶