Filter
Top Products
23
Adjustment tips for the operating menu
Adjustment tips for the operating
menu
Selecting a channel – “CHAN”
Via the “CHAN” menu, you can switch between the channels in the channel
banks “FIX” and “VAR“. The radio microphone is not transmitting while
this adjustment is being made.
When changing to the setting mode of the “CHAN” menu, the current
channel number appears on the display. After approx. 1 second, the
currently assigned frequency is displayed.
̈ To select a different channel, slide the multi-function switch ¶ to the
position ̆ (UP) or ̄ (DOWN). The new channel number appears on
the display panel for approx. 1 second and then the currently assigned
frequency is displayed.
Only after the new setting has been stored (“STORED” has appeared
on the display panel) does the transmitter operate on the
transmission frequency of the new channel.
Selecting the frequencies to be stored in
the channel bank “VAR” – “TUNE”
Via the “TUNE” menu, you can freely select the frequencies to be stored in
the channel bank “VAR” (variable bank). The radio microphone is not
transmitting while this adjustment is being made.
When setting frequencies on the radio microphone, please observe
the following:
̈ Make sure that the desired frequencies are listed in the
enclosed frequency table and approved and legal in your
country. If necessary, apply for an operating license.
For an overview of the frequencies and transmission powers,
refer to the enclosed supplement “Legal requirements for the
use of radiomicrophones”.
1 sec.
CH
CH
MHz
CH