Filter
Top Products
27
Adjustment tips for the operating menu
Loading the factory-preset default settings –
“RESET”
Via the “RESET” menu, you can load the factory-preset default settings.
After the reset, the standard display is shown on the display panel.
Activating/deactivating the automatic
lock mode – “LOCK”
The radio microphone has an autolock function (automatic lock mode)
that can be activated or deactivated via the “LOCK” menu. When the
autolock function is activated,
the lock mode is automatically activated
10 seconds after pressing the last button. The lock mode protects the radio
microphone from accidental programming. For daily use, we would
recommend activating the autolock function.
Function Setting
Low-cut frequency “FLAT”
Microphone sensitivity “–20 dB“
Name “5200“
Standard display frequency
Autolock function deactivated
Channel “FIX 01“
Output power “PWR.HI”
Frequencies in the channel bank “VAR” are reset
̈ In the selection mode of the “Lock” menu,
press the multi-function switch ¶ (switch
position ț SET).
The current setting of the autolock function
is displayed.
̈ Change the setting by sliding the multi-
function switch ¶ to the position ̆ (UP) or
̄ (DOWN).
Select “LOC.ON” to activate the autolock
function or select “LOC.OFF” to deactivate
the autolock function.
̈ Store your setting.
SET
DOWN
UP
¶
RF
RF