Filter
Top Products
28
Maintenance and care
Adjusting the output power – “POWER”
The radio microphone features switchable output power. With reduced
output power, the operating time increases.
In addition, you can also adjust the radio microphone to “Low
Intermodulation mode” (“LoI”). By so doing, the radio microphone’s
intermodulation performance is significantly improved, especially in multi-
channel operation. In “Low Intermodulation mode”, the output power is
reduced to 10 mW; the operating time will be about the same as using an
output power of 50 mW.
Displaying the software revision – “SW--REV”
You can display the current software revision of the radio microphone by
calling up the “SW--REV” menu item.
Exiting the operating menu – “EXIT”
Via the “EXIT” menu, you can exit the operating menu and return to the
standard display.
When in the operating menu, briefly pressing the ON/OFF button º will
cancel your entry (ESC function) and return you to the standard display
without saving any changes.
Maintenance and care
̈ Use a cloth to clean the radio microphone from time to time.
̈ Do not use any solvents or cleansing agents.
CAUTION! Liquids can damage the electronics of the radio
microphone!
Liquids entering the housing of the device can cause a
short-circuit and damage the electronics.
̈ Keep all liquids away from the radio microphone.