Sennheiser W100 Microphone User Manual


 
23
Switching the radiomicrophone on/off
̈ Turn the protective cap at the bottom of the radiomicrophone so that
the ON/OFF button ¹ becomes accessible.
̈ Press the ON/OFF button to switch the radiomicrophone on. The red LED
¸ lights up.
̈ To switch the radiomicrophone off, press the ON/OFF button ¹ until
“OFF” appears on the display. The red LED ¸ goes off.
Muting the transmitters
All transmitters have a MUTE switch that noiselessly mutes the transmitter’s
audio signal without switching the transmitter off.
Muting the SK 100 G2 and SKP 100 G2 transmitters
̈ Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears
on the transmitter display panel. Provided that the pilot tone function is
activated on both the transmitter and the receiver, the “MUTE” display
also appears on the receiver display panel.
̈ Set the MUTE switch back to the original position to retransmit the audio
signal.
Muting the SKM 100 G2 radiomicrophone
̈ Turn the protective cap at the bottom of the radiomicrophone so that
the MUTE switch Ƹ becomes accessible.
̈ Set the MUTE switch to the position ’MUTE’. The “MUTE” display appears
on the transmitter display panel. Provided that the pilot tone function is
activated on both the transmitter and the receiver, the “MUTE” display
also appears on the receiver display panel.
̈ Set the MUTE switch back to the original position to retransmit the audio
signal.
Activating/deactivating the lock mode
All transmitters and receivers have a lock mode that can be activated or deac-
tivated via the operating menu (see: „Activating/deactivating the lock
mode“ on page 35). The lock mode prevents that the transmitter or receiver
is accidentally programmed or switched off during operation.
¹
¸
SKP 100 G2
SK 100 G2
Ƹ