Filter
Top Products
42
Specifications
System
Receivers
RF characteristics
Modulation wideband FM
Frequency ranges 518–554, 626–662, 740–776, 786–822, 830–866 MHz
Transmission/receiving frequencies 8 channel banks with 4 factory-preset channels each
1 channel bank with 4 freely selectable channels
(1440 frequencies, tunable in steps of 25 kHz)
Switching bandwidth 36 MHz
Nominal/peak deviation ± 24 kHz/± 48 kHz
Frequency stability ≤ ± 15 ppm
AF characteristics
Noise reduction system Sennheiser HDX
AF frequency response 40–18,000 Hz
S/N ratio (at 1 mV and peak deviation)
≥
110 dB(A)
THD (at nominal deviation and 1 kHz) ≤ 0.9 %
General data
Temperature range –10 °C to +55 °C
Dimensions of carrying case [mm] 380 x 370 x 70
Weight of carrying case with EM 100 G2 approx. 3100 g
Weight of carrying case with EK 100 G2 approx. 2160 g
RF characteristics EM 100 G2 EK 100 G2
Receiver principle true diversity non diversity
Sensitivity (with HDX,
peak deviation)
<2.5 μV at 52 dBA
rms
S/N ratio <2.5 μV at 52 dBA
rms
S/N ratio
Adjacent channel rejection ≥ 65 dB ≥ 65 dB
Intermodulation attenuation ≥ 65 dB ≥ 65 dB
Blocking ≥ 70 dB ≥ 70 dB
Squelch 4 steps: OFF
LO: 5 dBμV
MID: 15 dBμV
HI: 25 dBμV
4 steps: OFF
LO: 5 dBμV
MID: 15 dBμV
HI: 25 dBμV
Pilot tone squelch can be switched off
Antenna inputs 2 BNC sockets
–
AF characteristics
AF output voltage
(at peak deviation 1 kHz
AF
)
¼’’ (6.3 mm) jack socket
(unbalanced): +18 dB
u
XLR socket (balanced): +12 dB
u
3.5 mm jack socket:
unbalanced: +10 dB
u
Overall device
Power supply 10.5–16 V DC,
nominal voltage 12 V DC
2 AA size batteries, 1.5 V
Power consumption approx. 200 mA approx. 130 mA
Power consumption with
switched-off receiver
–
≤ 250 μA
Dimensions [mm] 212 x 145 x 38 82 x 64 x 24
Weight approx. 1100 g approx. 158 g (incl. batteries)