Filter
Top Products
Installing Rack Mounts
The USR-100 is supplied with rack mounts for both double and single
mounting in a 19" equipment rack. For single mounting, the long and
short rack “ears” are used. For dual mounting, use the short “ears
and the mid brackets from two USR-100’s.
Figure 8
Assembly of Rack Mount
Assembly
To assemble the rack mount to the unit(s) and install it into a 19" rack,
proceed as follows:
Remove the front Phillips head screws from each side of each unit.
Refer to Figure 1.
Align the rack ear (Item No. 1 or 3) with the holes on the side of
the unit. Install the previously removed screws. Insert an additional
screw (Item No. 4 provided in the parts pack) into the remaining
hole. Repeat this step for the opposite side of the unit. Tighten all
screws securely.
Item
No. Description
1 Rack Ear, short
2 Mid Bracket
3 Rack Ear, long
4 Screw, #6-32 x 3/8" Phillips, pan head
5 Screw, #6-32 x 3/16" Phillips, flat head
6 Screw, #10-32 x 3/8" Phillips, pan head
-17-