Filter
Top Products
54
STEP 6: PLAYING SONGS!
Now that you’ve transferred songs to your Tiger Karaoke player you are ready to play songs!
Use the song select keys to select the song you want to sing.
Start the song by pressing the play button.
Set the volume of the song using the volume control.
Connect your microphone to one of the microphone
jacks on the front of your player. Then set the switch on the microphone to ‘on’.
Then set the microphone volume by singing into the microphone while
increasing the microphone volume control to the desired level.
To engage special and vocal effects use the select buttons.
Using your Tiger Karaoke Player
This section will guide you in using all the features of your Tiger Karaoke player.
FRONT PANEL CONTROLS AND CONNECTIONS
Song Select up/down: Use these two buttons to scroll up
and down through the songs you’ve downloaded to the player.
Spatial Effect select: This button toggles between a reverb
effect, echo effect and no effect.
Reverb and echo are both spatial effects
used by professional singers on your favorites
recordings. They create the sound of a concert
hall or the sound of your voice repeating
several times.
Spatial Effect level up/down: Use these two
buttons to raise and lower the volume of the
spatial effects.
Tempo up/down: Use these two buttons to
make the song play faster or slower.
Key up/down: Use these two buttons to raise or
lower the pitch of the song. If you have a low voice
lowering the key can make the song easier to sing.
Power switch: Pushing this power switch toggles the Tiger Karaoke player power on and off.
The Tiger Karaoke player is not disconnected from the mains (AC Power) when the power
switch is in the off position.
Microphone input 1 & 2: Use either one of these connections to connect the supplied microphone
to the Tiger Karaoke player. If you have 2 microphones both microphone inputs can be used.
Volume: This larger knob controls the speaker volume on your Tiger Karaoke player including
all effects, music and voice.
Microphone volume: This knob controls the volume of both microphone inputs.
If the Volume is too loud you will hear a high pitched ringing sound called feedback. Lower
the volume and move away from the speaker to make the feedback go away.
Play/Pause: This button starts the selected song. If a song is playing, it stops the song at the
current location.
Stop: This button stops the song currently being played.