Trane RX-212 Music Mixer User Manual


 
General Description
The RX-208, 212 and 216, are mixing consoles with 8, 12 and 16 inputs respectively, 2
program outputs, 2 foldback outputs, and 1 echo output. Each input channel and line
output has a balanced, low impedance, transformer-isolated, XLR connector, and an
unbalanced, 1/4" jack. Each input channel includes an accessory send/receive jack for
inserting a signal processing device into the signal path, and a phantom power
ON/OFF switch for permitting use of a condenser microphone. An input level switch
and trim control on each input channel are provided to permit optimum settings. A
four-band equalizer is included on each input channel. A peak indicator LED on each
input detects excessive inputs and helps avoid clipping. A pan control on each input
channel assigns the fader output signal of the channel to programs L and R. A cue
switch on each input channel, stereo input, aux/echo input, program output, foldback
output and echo send allows monitoring the respective, pre-fader (pre-volume)
signals through the phones output. All faders are log-linear type with 60mm of travel.
Additional stereo inputs are used to connect a stereo playback deck, disk player and
other auxiliary equipment. Two independent foldback outputs are included, (pre-
fader, pre-EQ) signals. An analog, electronic echo is built in, but can be bypassed (via
Echo Send/Return for external delay, reverb or special effects). Dual Graphic
Equalizers (1/1 octave, 9 bands) are switchable to either the program outputs or
foldback outputs. A fluorescent bargraph peak meter (2-color, vertical type) monitors
the outputs of the programs L and R, and foldbacks 1 and 2. These consoles are
designed for use in professional sound reinforcement systems, and provide versatile
functions to meet a wide range of requirements. The high performance and modular
construction assures reliability, easy maintenance, and serviceability.
Features
1. Balanced, low impedance, (transformer-isolated) XLR connector with an
unbalanced 1/4" jack on each input channel and line input.
2. An accessory send/receive jack on each input channel.
3. A phantom power switch on each input channel.
4. Input level switch and trim control on each input channel.
5. Four-band equalizer on each input channel.
6. Peak indicator LED on each input channel.
7. Cue switch on each input channel, stereo input, aux/echo input, program output,
foldback output and echo send.
8. All faders are log-linear type with 60mm travel.
9. Built-in, electronic analog echo unit.
10. Dual graphic equalizers (1/1 octave, 9 bands) are switchable to either the program
or foldback outputs.
11. Additional, stereo inputs for connecting a stereo playback deck, disk player and
other auxiliary equipment.
12. Fluorescent bargraph peak meters for monitoring the programs L and R, and
foldbacks 1 and 2.
- 2 -