Meter Panel
RX-208, RX-212
Graphic Equalizer (EQUALIZATION)
Two channel, 1/1 octave graphic equalizer
with 9 bands (filters) enables 12dB of boost
and attenuation at each center frequency
with the "0" position of each filter providing
flat response. The graphic equalizer is
switchable to either the program or foldback
outputs, or "off for A-B comparison.
Program L Output Meter (PGM L)
The meter indicates the program L output
level.
Program R Output Meter (PGM R)
The meter indicates the program R output
level.
FB 1 Output Meter (FB 1)
The meter indicates the FB 1 output level.
FB 2 Output Meter (FB 2)
The meter indicates the FB 2 output level.
Graphic Equalizer Selector Switch
(PGML, FB 1, OFF)
The 3-position switch assigns the equalizer
to either the program L or FB 1 circuits, with
the "off" position completely removing the
equalizer from the signal flow path.
Graphic Equalizer Selector Switch
(PGM
R, FB 2,
OFF)
The 3-position switch assigns the equalizer
to either the program R or FB 2 circuits, with
the "off" position completely removing the
equalizer from the signal flow path.
Caution
The graphic equalizer is normally used for either the PGM or FB mix. For normal operation, only one
button should be pressed. If the equalizer is not being used, the "OFF" button should be depressed.
RX-216
*The RX-216 is the same in its meter panel functions as the
RX-208 and RX-212.
Graphic Equalizer (EQUALIZATION)
FB 2 Output Meter
FB 1 Output Meter
Program R Output Meter
Program L Output Meter
Graphic Equalizer Selector Switch
(PGM
L, FB 1,
off)
Graphic Equalizer Selector Switch
(PGM
R, FB 2,
off)
- 5 -