Filter
Top Products
Adjust the Volume Balance and Changing Voices
— Mixing Console
CVP-900
126
Effect Structure
The CVP-900 features the following digital effect systems, which can be applied independently for the Natural voices
(page 89) and the Regular voices (page 89). The effect type, depth, and various parameters can be set with the panel
controls.
About the Effect Connections — System and Insertion
All the effect blocks are connected or routed in one of two ways: System or Insertion. System applies the selected effect
to all parts, while Insertion applies the selected effect to one specific part. Reverb, Chorus and DSP 2 are System effects,
and DSP 3 - 7 are Insertion effects. The DSP 1 effect, on the other hand, can be configured for either System or Insertion
routing.
The illustration below shows how the various effect blocks are set up and traces the signal flow for the send/return
controls set on the CVP-900.
For Regular Voices
OUT
Rev Send
MAIN VOICE
Dry
Cho Send
Unused DSP blocks are automatically
assigned to the active parts.
Rev Send
LAYER VOICE
Dry
Cho Send
Rev Send
LEFT VOICE
Dry
Cho Send
CHORUS1
Master EQ
REVERB1
DRY LINE
Rev Send
MIC
Dry
Cho Send
Rev Send
STYLE
(each channel)
Dry
Cho Send
DSP Send
DSP1
DSP1
MIC. Effect
Vocal
Harmony
When DSP is set as an Insertion effect
(here PART is set to one of the
STYLE channels), it is put here
in the signal flow.
Noise
Gate
3 Band
EQ
Compressor
DSP3
DSP4
DSP5
Rev Send
SONG
(each channel)
Dry
Cho Send
DSP6
DSP7
When DSP is set as a System effect,
it is put here in the signal flow.