Filter
Top Products
59
English Chapter 13: Using the PianoSmart Feature
When Re-recording Using
Another CD
☛ See Step 1 to 3 on pages 57 and 58.
4a
Press [REC] until the CD song
recording setting screen appears.
“##” indicating that no setting has been
made appears as the CD song number, and
the “Different CD!” display indicating that
the CD is different flashes.
4b
Use the [–/NO] and [+/YES]
buttons to select the number of
the song on the CD to be played.
4c
To end now, press [STOP], and
proceed to step 6.
5
To re-record, press [PLAY/PAUSE],
and recording will begin.
Start playing your song with the CD sound.
The following display appears.
“PS” indicates PianoSmart.
6
When you finish playing your
song, press [STOP].
When [STOP] is pressed, the following
display appears.
The following table gives a description of
each of options.
Option Description
SAVE The new recording is saved
under the current song number.
NEW The new recording is saved
under a new song number.
The existing song is kept
under the current song number.
CANCEL The new recording is
discarded.
The existing song is kept
under the current song number.
7
Use [<] and [>] to select an
option, then press [ENTER].
The re-recording is saved as indicated or
canceled.
Note: Unlike regular MIDI song playback,
the following restrictions apply to the
PianoSmart playback function.
•You cannot change the playback
tempo of songs on CDs.
•You cannot pause recording.
Note: In the case of a metronome recording,
an E-SEQ-recorded song or failure to
insert the CD, PianoSmart recording
cannot be performed. Regular MIDI
recording will be performed instead.