Yamaha PF-500 Musical Instrument User Manual


 
52 PF-500
Connections
Do not route the output from
the AUX OUT jacks to the
AUX IN jacks. That is, when
you connect an external
audio device to the AUX
OUT jacks, do not connect
the audio device to the PF-
500s AUX IN jacks. If you
make this connection, the
signal input at the AUX IN
jacks will be output from
AUX OUT. This creates an
audio loop, causing audio
oscillation and abnormal
playback, and leading to
malfunction of both pieces
of equipment.
Use audio cables and adap-
tor plugs with no resistance.
The PF-500s [MASTER
VOLUME] setting will not
affect the sound that is out-
put from AUX OUT (LEVEL
FIXED).
2 AUX OUT [R][L] Pin jacks (LEVEL FIXED), [R][L/L+R] Phone jacks
These jacks let you connect the PF-500 to your stereo system etc. to play at
higher volumes, or connect a cassette recorder etc. to record your playing.
Use audio cables to make connections as shown in the diagram.
CAUTION
When the PF-500’s AUX OUT jacks are connected to an external audio system,
first turn on the power to the PF-500, then to the external audio system. Reverse
this order when you turn the power off.
3 PHONES jack
See page 16.
4 PEDAL jack
See page 14.
Connect or disconnect the
pedal when the power is off.
5 AUX PEDAL jack
A separately sold FC7 foot controller or FC4/FC5 foot switch can be con-
nected to this jack. By using an FC7 you can control the volume while playing
to add expression to your performance, or control various other functions. By
using an FC4/FC5, you can switch various selected functions on/off. To select
the function that will be controlled, use the [VOICE SETTING] parameter
[AuxPedal] (See page 76). The SONG [START/STOP] function can also be
assigned to a foot switch (See page 84).
6 MIDI [IN], [OUT], [THRU] connectors
Use MIDI cables to connect external MIDI devices to these connectors.
Make sure you set the HOST SELECT switch (described on the privious page)
to MIDI when you use these connectors.
7 HOST SELECT switch
This switch should be set according to the type of connected MIDI device or
personal computer. (Refer to “Connecting a personal computer” on page 53
for more information.)
8 TO HOST jack
This jack allows direct connection to a personal computer. (Refer to “Con-
necting a personal computer” on page 53 for more information.)
9 USB jack
This jack allows direct connection to a personal computer. (Refer to “Con-
necting a personal computer” on page 53 for more information.)
CAUTION
TIP
TIP
AUX IN
phone plug
(standard)
audio cable
Stereo
To powered speakers
RCA
pin plug
RCA
pin plug
When these are connected (with stan-
dard phone plugs), you can use the
[MASTER VOLUME] control to adjust
the volume of the sound output to the
external device.
When these are connected (with RCA pin
plug; LEVEL FIXED), the sound is output to
the external device at a fixed level, regardless
of the [MASTER VOLUME] control setting.
PF-500
RL R
L/L+R
AUX OUT
LEVEL FIXED
TIP