Filter
Top Products
PF-500 73
Detailed settings for the voices [VOICE SETTING]
This will be displayed only if VibeRotor is selected
for the DSP Type parameter explained above.
It turns on/off the vibrato effect that is applied
when you use the VibeRotor pedal.
See the procedure on page 63.
Setting range:
On/Off
This will be displayed only if RotarySpeaker is
selected for the DSP Type parameter explained above.
It sets the rotation speed of the rotary speaker effect.
See the procedure on page 63.
Setting range:
Slow/Fast
This sets the depth of the DSP effect (page 72).
Some DSP Type settings do not allow you to set the
DSPDepth.
See the procedure on page 63.
Setting range:
1 (output only the original sound with almost no
effect applied)–127 (output only the sound pro-
cessed by the effect)
See the procedure on page 63.
Setting range:
–64–+63
Resonance= Sympathetic vibration
See the procedure on page 63.
Setting range:
–64–+63
Turning the vibraphone
vibrato effect on/off* [VibeRo-
torOnOff (RotorOnOff)]
Setting the rotation speed of
the rotary speaker* [Rota-
rySpeed (Rot.Speed)]
Adjusting the depth of the
DSP effect* [DSPDepth]
C
A
D
B
NO YES
Adjusting the brightness of the
sound* [Brightness]
Adjusting the resonance
effect* [HarmonicContent
(Harmonic)]
TERMINOLOGY