Filter
Top Products
PF-500 79
MIDI [MIDI SETTING]
“Local Control On” is a state in which the PF-500
produces the sound from its tone generator when
you play the keyboard. In “Local Control Off”
state, the keyboard and the tone generator are cut
off from each other. This means that even if you
play the keyboard, the PF-500 will not produce the
sound. Instead, the keyboard data can be transmit-
ted via MIDI to a connected MIDI device, which
can produce the sound. The “Local Control Off”
setting is useful when you wish to play an external
sound source while playing the keys on the PF-500.
See the procedure on page 63.
Setting range:
On/Off
Normal setting:
On
You can select whether your performance data or
song playback data (including demo songs) is sent
via MIDI.
See the procedure on page 63.
Setting range:
Keyboard performance data played on the key-
board
Song song playback data
Normal setting:
Keyboard
This parameter enables you to specify which MIDI
data the PF-500 can receive.
See the procedure on page 63.
Type of data:
Note, Control, Program, Pitch Bend, SysEx (Sys-
tem Exclusive)
Setting range:
On/Off
Normal setting:
On for all types of data
This parameter enables you to specify which MIDI
data the PF-500 can transmit.
See the procedure on page 63.
Type of data:
Note, Control, Program, Pitch Bend, SystemReal-
Time, SysEx (System Exclusive)
Setting range:
On/Off
Normal setting:
On for all types of data
Setting Local control on/off
[LocalControl]
Selecting performance from
the keyboard or song data for
MIDI transmission [MidiOutSe-
lect]
C
A
D
B
NO YES
C
A
D
B
NO YES
Selecting a type of data
received via MIDI [ReceivePa-
rameter]
Selecting a type of data trans-
mitted via MIDI [TransmitPa-
rameter]
C
A
D
B
Select a type of data.
Select On or Off.
NO YES
C
A
D
B
Select a type of data.
Select On or Off.
NO YES