Filter
Top Products
PM1D V2 System Software Installation Guide
14
Errors in connection to the authentication
server
• Unable to connect to the authentication server.
→ Make sure that the computer is connected to the Internet.
The authentication server may be very busy now. Try to
connect to the server later.
• Access key cannot be issued because the PRODUCT ID is
wrong.
• Access key cannot be issued because registration code is
wrong.
→ Make sure that the PRODUCT ID or the registration code is
correct, then try to install again.
• New access key cannot be issued because this PRODUCT
ID has already issued access key.
→ The license for this PRODUCT ID has already been used on
a different CS1D. If you wish to install the license in another
CS1D, you must de-authorize the license on the current
CS1D. When you de-authorize the license on the current
CS1D, you will be unable to use that CS1D until you re-
install or re-authorize the license on that console.
• Unable to de-authorize because unregistration code is
not in agreement with the information when access key
was issued.
• Cannot de-authorize as unregistration code is wrong.
→ Make sure that the unregistration code is correct, then try to
de-authorize the software again.
• De-authorization is not required as access key has not
been issued for this PRODUCT ID.
→ Check the PRODUCT ID that was used to install the license,
then try to de-authorize the license again.
Error Messages on the Console
• “Please grant authority”
→ The access key has not been written. After the installation or
authorization is complete, you can use the system software.
Q: The computer does not communicate with the
CS1D.
A: This installer does not support installation via a USB
connection. Please use a D-sub 9-pin cross-cable to make
connections before you begin the process.
A: If there is no problem with the settings described above, turn
off and on the power to the CS1D.
Q: The computer cannot access the
authentication server.
A: Make sure that the computer is connected to the Internet.
A: You must select in Internet Explorer [Tools → Internet
Options... → Advanced], then select one or more of “Use
SSL 2.0,” “Use SSL 3.0,” and “Use TSL 1.0.” (One or more
have already been selected as the default setting.)
Q: The access key, registration code,
unregistration code, or PRODUCT ID is
incorrect.
A: The code is different for each CS1D and each software
package. Make sure that you are entering the correct code
for the correct CS1D and correct package.
Q: You lost the access key.
A: You can obtain the access key again. Check the PRODUCT
ID printed on the label on the CD-ROM case, then try to
install the license again.
Q: The CS1D does not respond or operate
correctly.
A: Consult your Yamaha dealer.
Q: You wish to install the license in a different
CS1D.
A: You can de-authorize the license of the installed system
software, then install it on another CS1D. However, you will
be unable to use the de-authorized CS1D until you re-install
or re-authorize the license.
Q: You wish to update the system software to the
latest version.
A: Check the following Yamaha website:
http://www.yamahaproaudio.com/
Q: You are unable to acquire an access key from
the authentication server even after checking
your system and following the steps described
in the Error Message list and Troubleshooting
section.
A: Contact Yamaha at the following e-mail address. Please send
the e-mail in English.
dm0v2_upgrade@emi.yamaha.co.jp
Troubleshooting