Filter
Top Products
10
YDP-101
After making sure that the YDP-101’s AC cord is properly plugged
into the YDP-101 itself and plugged into a convenient AC wall outlet,
press the [POWER] switch located to the right of the keyboard to turn
the power ON. In some areas a plug adaptor may be provided to match
the pin configuration of the AC wall outlets in your area.
When the power is turned ON, one of the voice selector LEDs will
light, and the power indicator located below the left end of the keyboard
will light.
Set the Volume ..................................................................................................
Initially set the [MASTER VOLUME] control about half way
between the “MIN” and “MAX” settings. Then, when you start playing,
re-adjust the [MASTER VOLUME] control for the most comfortable
listening level.
Select a Voice .....................................................................................................
Select the desired voice by pressing one of the voice selectors. Use
the [VARIATION] button to select a variation of the current voice, as
required.
Play................................................................................................................................
The YDP-101 also offers keyboard touch response, so the volume
and timbre of notes played can be controlled according to how “hard”
you play the keys. The amount of variation available depends on the
selected voice.
Add Reverb As Required.......................................................................
You can add or change reverb as desired by using the [REVERB]
button (page 16).
Selecting & Playing Voices
Turn Power On...................................................................................................
MASTER VOLUME
MAX
MIN
POWER
GRAND
PIANO
E.PIANO
HARPSI-
CHORD
STRINGS
PIPE
ORGAN
VARIATION
REVERB
ROOM
HALL1
HALL2
STAGE
8