Yamaha YDP-101 Musical Instrument User Manual


 
19
YDP-101
Tuning
Tuning makes it possible to adjust the pitch of the YDP-101 over a 427.0 Hz
453.0 Hz (corresponding to the A3 notes Hz) range in approximately 0.2
Hertz intervals. Pitch control is useful for tuning the YDP-101 to match other
instruments or recorded music.
Tuning Up ...............................................................................................................
Z To tune up (raise pitch), hold the A-1 and B-1 keys simultaneously.
X Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is increased by approximately 0.2 Hz.
The [–/NO] and [+/YES] buttons can also be used to tune down or up,
respectively, in
approximately
1 Hz
decrements/
increments. Press the
[–/NO] and [+/YES] buttons simultaneously to recall standard tuning
(A3 = 440 Hz).
C Release the A-1 and B-1 keys.
Tuning Down .......................................................................................................
Z To tune down (lower pitch), hold the A-1 and A#-1 keys simulta-
neously.
X Press any key between C3 and B3. Each time a key in this range is
pressed the pitch is decreased by approximately 0.2 Hz.
The [–/NO] and [+/YES] buttons can also be used to tune down or up,
respectively, in
approximately
1 Hz
decrements/
increments. Press the
[–/NO] and [+/YES] buttons simultaneously to recall standard tuning
(A3 = 440 Hz).
C Release the A-1 and A#-1 keys.
To Restore Standard Pitch...................................................................
Z To restore the default pitch (A3 = 440 Hz), hold the A-1, A#-1 and
B-1 keys simultaneously.
X Press any key between C3 and B3.
C Release the A-1, A#-1 and B-1 keys.
In terms of “Hertz”, the overall tuning range is from 427.0 Hz to 453.0
Hz. The current tuning setting is shown on the LED display while the tuning
is being adjusted. Tenths of a Hertz are indicated on the LED display by the
appearance and position of one or two dots, as in the following example:
NOTE
An alternative tuning method is available in the Function mode page 25.
Display Value
440 440.0
4.40 440.2
44.0 440.4
440. 440.6
4.40. 440.8
C
3
B
3
A
-1
B
-1
SONG
SELECT
/
NO
+
/
YES
SONG
SELECT
/
NO
+
/
YES
A
-1
A#
-1
C
3
B
3
A
-1
B
-1
A#
-1
C
3
B
3
17