Filter
Top Products
9
YDP-101
Connections
1 AUX OUT L/L+R and R Jacks
The AUX OUT L/L+R and R jacks deliver the output of the YDP-101
for connection to an instrument amplifier, mixing console, PA system, or
recording equipment. If you will be connecting the YDP-101 to a monau-
ral sound system, use only the L/L+R jack. When a plug is inserted into
the L/L+R jack only, the left- and right-channel signals are combined and
delivered via the L/L+R jack so you don’t lose any of the YDP-101’s
sound.
• The AUX OUT jack signal is not controlled by the YDP-101’s volume control.
Use the volume control on the external audio equipment to adjust the level.
2 PEDAL Jack
This terminal is for connecting the pedal cord from the pedal box (refer
to the “Keyboard Stand Assembly” on pages 40-45).
3 MIDI IN and OUT Connectors
The MIDI IN connector receives MIDI data from an external MIDI
device (such as a sequencer or MIDI instrument) which can be used to
control the YDP-101. The MIDI OUT connector transmits MIDI data
generated by the YDP-101 (e.g. note and velocity data produced by
playing the YDP-101 keyboard).
More details on MIDI are given in “MIDI Functions” on page 28.
● PHONES Jacks
(Bottom Panel)
Two sets of standard stereo headphones can be plugged in here for
private practice or late-night playing. The internal speaker system is
automatically shut off when a pair of headphones is plugged into either of
the PHONES jacks.
AUX OUT
RL
/
L+R
Stereo System
123
MIDI
PEDAL
IN OUT
AUX OUT
RL
/
L+R
Sequencer
MIDI
IN OUT
7