Filter
Top Products
24
YDP-101
The Function Mode
The [FUNCTION] button provides access to a range of functions that give the
YDP-101 extraordinary versatility. The functions are categorized in groups as
follows:
F1 Tuning ....................................................................... 25
F2 Scale ......................................................................... 25
F3 Dual Mode Functions .............................................. 26
F4 Left Pedal Mode ....................................................... 27
F5 Metronome Volume .................................................. 27
F6 Piano Song Part Cancel Volume............................. 27
F7 MIDI Functions......................................................... 28
F8 Backup Functions ................................................... 31
To Select a Function … ...........................................................................
Z Press the [FUNCTION] button so that its indicator lights.
NOTE
• Functions cannot be selected during demo/piano song playback or when
the recorder is in operation.
X Use the FUNCTION [<] and [>] buttons to select the desired
function.
C In the case of the Scale (F2), Dual Mode (F3), MIDI (F7), and
Backup (F8) functions, you will have to press the [+/YES] button
once to enter the respective sub-mode after the function has been
selected, and then use the FUNCTION [<] and [>] buttons again
to select the desired sub-function.
NOTE
• The Dual mode must be engaged before the F3 function can be selected.
If the Dual mode is not engaged, “
F3.-
” will appear on the display and the
Dual sub-mode will not be available.
V Set the function as required by using the [–/NO] and [+/YES]
buttons (see the individual function descriptions, below).
NOTE
• After selecting the function, the current setting will be displayed when the
[–/NO] or [+/YES] button is pressed for the first time.
B Press the [FUNCTION] button so that its indicator goes out to exit
from the function mode.
● Operation Example
(sub-mode)
Press [+/YES]
Use FUNCTION [<], [>]
Use [–/NO], [+/YES]
Press [–/NO] or [+/YES]
once
FUNCTION
TEMPO
FUNCTION
FUNCTION
TEMPO
FUNCTION
22