Filter
Top Products
ZOOM B2
31
Specifications
Effect types
47
Effect modules
Max. 9 simultaneous modules
Patches
User area: 10 patches x 4 banks
Preset area: 10 patches x 4 banks
Sampling frequency
96 kHz
A/D converter
24 bit, 64 times oversampling
D/A converter
24 bit, 128 times oversampling
Signal processing
32 bit
Frequency response
20 Hz – 40 kHz +1 dB -3 dB (with 10 kilohms load)
Display
2-digit 7-segment LED
Parameter LEDs
Input
Standard mono phone jack
Rated input level
-20 dBm
Input impedance
1 megohm
Output
Standard stereo phone jack (doubles as line and headphone jack)
Maximum output level
Line: +5 dBm (output load impedance 10 kilohms or more)
Phones: 20 mW + 20 mW (into 32 ohms load)
Control input
For FP02 (FP01)/FS01
Power requirements
AC adapter
9 V DC, 300 mA (center minus plug) (ZOOM AD-0006)
Batteries
Four IEC R6 (size AA) batteries,
Approx. 7.5 hours continuous operation (alkaline batteries)
Dimensions
162 mm (D) x 156 mm (W) x 65 mm (H)
Weight
700 g (without batteries)
Options
Expression pedal FP02/ Foot switch FS01
• 0 dBm = 0.775 Vrms
• Design and specifications subject to change without notice.
Troubleshooting
●
No power
Refer to "Turn power on" on page 8.
●
Reverb effect does not operate
While a rhythm pattern is playing, the reverb effect is not available. Stop the rhythm pattern first
(
→
p. 12).
●
High level of noise
Is ZOOM AC adapter being used? Be sure to use only adapter for 9 V DC, 300 mA with center
minus plug (ZOOM AD-0006).
●
Battery life is short
Are manganese batteries being used? The use of alkaline batteries is recommended.
EB2.fm 31 ページ ２００５年７月２７日 水曜日 午後４時１５分