Filter
Top Products
6
ZOOM G1N/G1XN
7
ZOOM G1N/G1XN
Controls and Functions / Connections (G1XN)
[VALUE] knob
[BANK UP·TAP] key
RHYTHM [
R/P] key
Module selector
[
W
]/[
Q
] foot switches
[INPUT] jack
AC adapter
Guitar
Guitar amplifier
Headphones
Serves for connecting the guitar. When
operating the G1XN on batteries,
inserting the guitar cable plug into this
jack will turn the unit on.
[DC IN] jack
An AC adapter (ZOOM AD-0006) with a rated output
of 9 volts DC, 300 mA (center minus plug) can be
plugged into this jack.
In play mode, the key switches to the next higher bank. In other
modes, the key serves for manual adjustment of rhythm pattern
tempo as well as parameters related to timing and cycle.
Expression pedal
Display
Can be used as a volume pedal or as a real-time controller for
adjusting effect parameters. (For details, see page 20.)
[PEDAL ASSIGN] key
Selects the module to be controlled by the built-in expression pedal.
[STORE] key
Serves for storing edited patches in memory and for copying
patches to another location.
Shows bank and patch
numbers, setting values, and
other information for
operating the G1XN.
This knob serves for changing parameter values and setting the
level of the overall patch.
These switches are used for selecting patches, controlling the tuner,
and other functions.
Serves to start and stop the
rhythm pattern in play mode
and rhythm mode.
Switches between play mode,
rhythm mode, and edit mode.
In edit mode, the knob selects
the module/parameter for
operation.
Top Panel
Rear Panel
When operating the G1XN on
batteries, it is advisable to
disconnect the guitar cable plug
from the [INPUT] jack when not
using the unit, to conserve battery
power.
[OUTPUT/PHONES] jack
This stereo phone jack serves for connection to the guitar
amplifier. It is also possible to use a Y cable for sending the
output to two amplifiers, or to plug a pair of stereo
headphones into this jack.
Controls and Functions / Connections (G1XN)