Zoom G1XN Music Pedal User Manual


  Open as PDF
of 16
 
12
ZOOM G1N/G1XN
13
ZOOM G1N/G1XN
Using the Rhythm Function (Rhythm Mode)
Using the Rhythm Function (Rhythm Mode)
Set the Module selector to the "RHYTHM" position.
The number of the currently selected rhythm pattern
(01 – 40) appears on the display.
Also while in rhythm mode, you can use the patch that
was selected immediately before switching the mode.
However, reverb effects are disabled in rhythm mode.
The rhythm function can also be used in play mode.
Press the RHYTHM [
R
/
P
] key.
Rhythm pattern playback will start also if you press the
RHYTHM [
R
/
P
] key in play mode. However,
changing the rhythm pattern or adjusting the rhythm
volume and tempo is not possible.
To switch between the 40 built-in rhythm patterns,
press one of the [
W
]/[
Q
]footswitches.
(For information on pattern contents, see page 26.)
When you press both [
W
]/[
Q
] foot switches in rhythm
mode, the G1N/G1XN switches to the bypass/mute
condition. The tuning function (
g
p. 10) can be used in
this condition while playing the rhythm pattern.
Select rhythm mode
1
Start the rhythm function
2
Select a rhythm pattern
3
This section describes how to use the built-in rhythm function that plays realistic drum sounds in
various patterns.
Turn the [VALUE] knob.
The current setting (0 – 30) is shown briefly on the
display.
Press the RHYTHM [
R
/
P
] key.
The G1N/G1XN returns to the previous condition.
Therhythmpatterntempocanbeadjustedinthe
rangeof40–250BPM(beatsperminute).
•Tocontinuouslychangethetempo
Hitthe[BANKUP·TAP]keyonceandthenturn
the[VALUE]knobwhilethetempovalueisbeing
shown on the display.
•Tomanuallyspecifythetempo
Hitthe[BANKUP·TAP]keyatleasttwiceinthe
desired interval. The G1N/G1XN automatically
detects the interval in which the key is pressed the
second and subsequent times, and sets the tempo
accordingly (tap tempo function).
While the above steps are carried out, the new tempo
value (40 – 250) is shown briefly on the display. For
valuesintherangefrom100to199,adotisshownin
the center, and for values of 200 and above, dots are
shown in the center and in the bottom right corner.
With the G1N, using a separately available foot switch
to manually adjust the tempo is also possible (
g
p. 18).
The G1XN does not support use of a foot switch.
Adjust the rhythm volume
4
Stop the rhythm
6
Adjust the tempo
5
HINT
HINT
HINT
0 1
Rhythm pattern
number
25
40
Push once
HINT
2 0
4 0
Dot is shown
Tempo = 120 BPM
Dots are shown
Tempo = 240 BPM
Detected automatically
 previous next