Filter
Top Products
14
ZOOM RFX-1100
5.
MIC SIMULATOR
VARIATION
REVERB TIME/ADJUST
Vocal/Inst Comp
Enhance
Simulates the characteristics of a high-quality condenser microphone
while using an economical dynamic microphone.
Switches the characteristics for vocals or
instruments, and adjusts the limiter
sensitivity.
Adjusts the intensity of the
treble enhancer.
1 - 6: Vocals
Higher numbers result in
higher limiter sensitivity.
7 - 11: Instruments
Higher numbers result in
higher limiter sensitivity.
6.
CABINET SIM
VARIATION
REVERB TIME/ADJUST
Combo/Stack &
Depth
Presence
Adds the sound character of an amplifier speaker cabinet to the sound of
an electric guitar.
Selects the amplifier type (combo or stack)
and adjusts the effect intensity.
Adjusts the level of the ultra
high range.
1 - 6: Combo type
Higher numbers result in
stronger cabinet sound.
7 - 11: Stack type
Higher numbers result in
stronger cabinet sound.
7. ROTARY
VARIATION
REVERB TIME/ADJUST
Drive
Rotary Rate
Simulates a rotary speaker where the speaker is turned by mechanical
means.
Adjusts the amount of distortion. Turning the
control clockwise increases distortion.
Adjusts the speaker rotation
speed.
Strong distortion
Weak distortion
Slow rotation
Fast rotation
8. RING MOD
VARIATION
REVERB TIME/ADJUST
Delay Mode
Frequency
This is a ring modulator with short delay.
Switches the delay mode. Sets the frequency with
which the input signal is to
be multiplied.
1: Delay = Off
Varies the input signal
modulation frequency.
11: Feedback = Off
2 - 10: Varies the delay time
from flanging to repeat
delay.
9. RESONANCE
VARIATION
REVERB TIME/ADJUST
Type & Q
Frequency
/ Sensitivity
This is a filter effect with a resonance component.
Selects the filter type and adjusts the
resonance intensity.
When the Type & Q
parameter is set to manual
(1 - 6), this control adjusts
the cutoff frequency. When
the Type & Q parameter is
set to automatic (7 - 11), this
control adjusts the
sensitivity.
1 - 6: Manually adjusts the
cutoff frequency. Turning the
control clockwise increases
the resonance.
7 - 11: Uses the input signal
envelope to automatically
alter the cutoff frequency.
Turning the control
clockwise increases the
resonance.
RFX-1100 Effects
10.
Lo-Fi EFX
VARIATION
REVERB TIME/ADJUST
Lo-Fi Color
Tone
This is a special effect that can be used to purposely degrade
sound quality.
Selects the sound character. Adjusts the effect tone.