Filter
Top Products
(2) REVERB TIME/ADJUST control
The function of this control differs, depending on
which effect bank is currently selected with the
BANK switch.
(1) MIX control
Adjusts the mixing balance between the original sound and the effect sound.
• When using the insert type
connection pattern
• When using the send/return
type connection pattern
•
REVERB bank selected with BANK selector
Use the MIX control to adjust the
mixing balance between original
sound (DRY) and effect sound (WET).
For effects such as compressor/limiter
or microphone simulator where the
output is the processed original sound,
turn the MIX control fully to WET.
The MIX control should be turned
fully to WET, so that only the effect
sound is output. The mixing balance
between original sound and effect
sound should be adjusted at the
mixer or multi-track recorder.
Effect sound
Original sound
Only effect
sound is
output
11 reverb character
settings
Unprocessed sound
(original sound)
Processed
sound
The control adjusts
the reverb duration.
•
EFFECTS/MIX&SFX bank selected with selector
The control adjusts a major parameter of the
currently selected effect.
The control adjusts a major parameter of the
currently selected effect.
(3) CHARACTER/VARIATION selector
The function of this selector differs, depending
on which effect bank is currently selected with
the BANK switch.
For information on which parameters can be
adjusted for each effect, see pages 8 - 15.
For information on which parameters can be
adjusted for each effect, see pages 8 - 15.
•
REVERB bank selected with BANK selector
The selector can be used to
choose one of 11 reverb sound
characteristics (settings with
different tone and intensity).
•
EFFECTS/MIX&SFX bank selected with selector
Short reverb Long reverb
7
ZOOM RFX-1100
The following controls are available for changing the sound character and intensity of the preset effects of the RFX-1100
and for adjusting the balance between original sound and effect sound.
Changing the Sound of an Effect
Changing the Sound of an Effect