Filter
Top Products
3
ZOOM RFX-1100
Controls and Functions
(8) REVERB TIME/ADJUST control
(10) BANK selector
(11) EFFECT TYPE selector
(9) CHARACTER/VARIATION selector
(12) POWER switch
(13) POWER indicator
(3) OUTPUT jacks
(4) INPUT jacks
(8) REVERB TIME/ADJUST control
Serves to adjust an effect parameter of the currently
selected effect.
(9) CHARACTER/VARIATION selector
Serves to choose one of 11 character settings for the
currently selected effect, or to adjust an effect
parameter.
(10)BANK selector
Serves to select the effect bank (group of effects). The
following three effect banks are available.
• REVERB bank
Contains various reverb effects.
• EFFECTS bank
Contains single effects for instruments and voice,
and combined effects.
• MIX&SFX bank
Contains special effects and effects particularly
suited for mixdown (mixing multiple tracks onto
two final stereo tracks).
(11)EFFECT TYPE selector
Serves to choose an effect from the currently selected
bank.
(12)POWER switch
Serves to turn the unit on and off.
(13)POWER indicator
When the RFX-1100 is on, this LED indicator is lit in
green. When the foot switch FS01 (option) was used
to switch the effects off, the indicator flashes red.
(3) OUTPUT jacks
Connect these jacks to the recorder or playback
system.
(4) INPUT jacks
Connect a line-level source, such as an instrument or
the send output of a mixer, to these jacks. If a plug is
inserted only in the L/MONO jack, the signal from
this plug will be supplied to both channels. A high-
impedance source such as an electric guitar should be
routed through a preamplifier or a guitar effect first.
Controls and Functions